H3CNE 08 VLAN Access配置实例

admin

H3CNE 08 VLAN ACCESS配置实例

<H3C>system-view

[H3C]sysname sw1

方法一、在VLAN中划入相关端口

[sw1]vlan 10  //创建VLAN

[sw1-vlan10]name caiwu //命名VLAN

[sw1-vlan10]description caiwu  //描述VLAN

[sw1-vlan10]port GigabitEthernet 1/0/1  //加入端口

[sw1-vlan10]vlan 20

[sw1-vlan20]name shichang

[sw1-vlan20]description shichang

[sw1-vlan20]port GigabitEthernet 1/0/2

[sw1-vlan20]quit

[sw1]interface vlan-interface 10  //创建VLAN接口

[sw1-Vlan-interface10]description caiwu gateway  //描述接口名称

[sw1-Vlan-interface10]ip address 172.16.10.1 24  //配置地址

[sw1-Vlan-interface10]quit

[sw1]interface vlan-interface 20

[sw1-Vlan-interface20]description shichang gateway

[sw1-Vlan-interface20]ip address 172.16.20.1 24

[sw1-Vlan-interface20]quit

[sw1]display vlan 10 //查看VLAN信息

[sw1]display interface vlan-interface 10  //查看VLAN接口信息

[sw1]display ip interface brief  //查看IP接口摘要信息

[sw1]display ip routing-table  //查看路由表

方法二、在端口中指定相关VLAN

类似于华为port link-type access 及portdefault vlan XX

[sw1]interface GigabitEthernet 1/0/3

[sw1-GigabitEthernet1/0/3]port access vlan 10  //接口类型为访问 并且加入VLAN

此一条命令相当于合并了华为的两条命令。